Μονάδα πομποδέκτη δικτύου BlueOptics 740-014279-BO οπτική ίνα 10000 Mbit/s SFP+

The BlueOptics 740-014279-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s networks. It supports a maximum data transfer rate of 10000 Mbit/s and uses an SFP+ interface in a compact silver module weighing 20 g. The transceiver is compliant with CE, RoHS and FCC standards and is intended for single‑mode fiber links with LC Duplex connectivity. It provides a plug‑in solution for high‑speed network equipment that accepts SFP+ form‑factor modules.

Advantages

This SFP+ transceiver offers a standardized SFP+ interface for easy hot‑swap installation in compatible network devices. Its single‑mode fiber design and LC Duplex connector enable simultaneous transmit and receive over separate fibers. Compliance with international safety and environmental directives ensures broad usability in enterprise and data center environments. The small, lightweight silver enclosure simplifies handling and installation in dense port configurations.

Suitable for

• 10 Gbit/s Ethernet links over single‑mode fiber
• Interconnects between switches, routers and storage systems
• Data center uplinks and aggregation ports
• Longer distance optical connections where LC Duplex single‑mode fiber is used

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical fiber type: single‑mode
• Connector: LC Duplex
• Module colour: silver
• Weight: 0.02 kg
• Regulatory compliance: CE, RoHS, FCC

How to use

Ensure the host device supports SFP+ transceivers and the intended 10 Gbit/s protocol. Power down or follow the device's hot‑swap procedure, insert the BlueOptics SFP+ module into an available SFP+ port until it clicks into place, and connect LC Duplex single‑mode fiber patch cords to the transmit and receive ports. Configure link settings on the connected equipment as required by your network (speed, duplex, and any protocol settings). Verify link status and diagnostics through the host device interface.

Recommendations

Use high‑quality single‑mode LC Duplex patch cords and maintain clean fiber connectors to achieve optimal range and signal quality. Confirm DDM/DOM support in the host device if you need live diagnostic data, and follow the manufacturer's handling guidelines to avoid electrostatic or mechanical damage to the module.