Μονάδα πομποδέκτη χαλκού BlueOptics X6569-R6-T-BO 10000 Mbit/s RJ-45

The BlueOptics X6569-R6-T-BO is a copper SFP transceiver module designed for 10GBASE-T networks. It provides a standard RJ-45 interface for connection to copper infrastructure and supports data transfer rates up to 10000 Mbit/s. The module is compact and lightweight (approximately 20 g) and complies with RoHS standards, making it suitable for integrating into compatible switches, routers and storage systems that accept SFP/SFP+ copper modules.

Advantages

The transceiver offers plug-and-play installation with an RJ-45 connector and supports 10 Gbit/s copper links over standard twisted-pair cabling. Its compact silver housing and low weight simplify handling and placement in dense port environments. Compliance with RoHS ensures reduced hazardous substances, and the module is manufactured to industry mechanical and electrical interface standards to work with equipment that supports compatible 10GBASE-T SFP+ modules.

Suitable for

Key specifications

How to use

Insert the BlueOptics X6569-R6-T-BO transceiver into an SFP+ compatible port on your network device until it clicks into place, then connect an appropriate RJ-45 copper cable to the module. Ensure the host device supports 10GBASE-T SFP+ copper transceivers and that device firmware or software does not block third‑party modules. After installation the link should negotiate to the highest common speed; verify link status and speed in the host device management interface.

Recommendations

Use Cat6a or better twisted-pair cabling for reliable 10 Gbit/s performance at short reaches. Verify hardware compatibility and enable any required DDM/DOM or diagnostic support in the host device if link monitoring is needed. Avoid excessive mechanical stress on the module and connect it only when devices are powered according to the equipment manufacturer’s instructions.