Μονάδα πομποδέκτη χαλκού BlueOptics TRPRG1VA1C000E2G-BO 1250 Mbit/s RJ-45

The BlueOptics TRPRG1VA1C000E2G-BO is a copper SFP transceiver module that provides 1250 Mbit/s data transfer over an RJ-45 interface. Designed for use in standard SFP ports, the module operates from a 3.3 V supply and is housed in a durable metal casing that supports reliable operation in network equipment. The transceiver follows MSA-compatible 1000BASE-T specifications and is intended for insertion into switches, routers and other network devices that accept copper SFP modules.

Advantages

This BlueOptics copper transceiver offers a compact SFP form factor with an RJ-45 connector, enabling easy integration into existing SFP slots without requiring additional media converters. The metal housing provides mechanical protection and thermal stability. Support for 1250 Mbit/s throughput makes the module suitable for Gigabit Ethernet and related high-speed protocols, while the familiar RJ-45 interface simplifies cabling with standard twisted-pair copper cabling.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures of your network device according to the vendor guidelines, then insert the BlueOptics SFP transceiver into a compatible SFP slot until it latches. Connect a standard RJ-45 twisted-pair cable to the module and to the remote device. Ensure the host device supports 1000BASE-T SFP modules and configure link speed and duplex settings as required by your network. After insertion, verify link status through the device management interface or LED indicators.

Recommendations

Use Cat5e or Cat6 cabling for optimal Gigabit performance and keep cable runs within recommended distances for copper SFP links. Confirm your switch, router, or other host hardware supports third-party MSA-compliant 1000BASE-T SFP modules and enable any necessary firmware settings. For critical links, perform end-to-end testing and monitor link status to ensure stable operation.