Microconnect SFTP70025Y καλώδιο δικτύου κίτρινο 0,25 m Cat7 S/FTP (S-STP)

The Microconnect SFTP70025Y RJ-45 Cat7 0.25 m Yellow is a short, shielded Ethernet patch cable designed for reliable connections between network devices such as switches, modems, routers and wall outlets or patch panels. Built to Cat7 principles and tested up to 600 MHz, the cable uses S/FTP shielding and RJ-45 terminations to provide a compact, backwards-compatible link for small office, home network and entertainment setups.

Advantages

This 0.25 m Microconnect Cat7 cable combines high-frequency performance (tested to 600 MHz) with S/FTP shielding to reduce electromagnetic interference (EMI) and crosstalk. The cable uses standard RJ-45 connectors that maintain compatibility with Cat6a, Cat6, Cat5e and Cat5 equipment. A protective strain-relief (snaggle) prevents connector damage during installation in confined spaces, while the yellow jacket simplifies identification in patch panels and cabling runs.

Suitable for

• Connecting a router, switch or modem to a nearby patch panel or network device
• Short patch connections in small offices or home networks
• Connecting entertainment devices (smart TVs, media players) to a local network

Key specifications

• Manufacturer: MicroConnect
• Model / MPN: SFTP70025Y
• Standard: Cat7 (tested to 600 MHz); connectors meet Cat6a minimum (up to 500 MHz)
• Shielding: S/FTP (overall braid with individually foil‑shielded pairs)
• Connectors: RJ-45 to RJ-45
• Length: 0.25 m
• Colour: Yellow
• Weight: 0.02 kg
• EAN: 5712505454534

How to use

Plug one RJ-45 connector into the network device (switch, router, modem or wall outlet/keystone jack) and the other into the corresponding port of the target device. Ensure connectors click into place for a secure connection. The short 0.25 m length is intended for close-proximity patching—avoid excessive bending or kinking of the cable near the connector to maintain signal integrity.

Recommendations

For optimal performance, use this SFTP Cat7 cable in environments where EMI or crosstalk may be present and where short patch connections are required. Do not exceed recommended bend radius and keep the cable away from strong electrical noise sources when possible.