Microconnect FIB411007 Καλώδιο InfiniBand/οπτικής ίνας 7 m LC ST κίτρινο

The Microconnect FIB411007 is a 7 m single-mode fibre optic patch cable with LC and ST connectors and OS2 fibre. With a 9 µm core diameter and yellow jacket, it supports full-duplex data links and is intended for enterprise networks, telecom rooms, server farms and cloud storage networks where reliable fibre jumper cables are required. The cable is suitable for 1G/10G/40G/100G Ethernet connections and can transport data up to 10 km at 1310 nm or up to 40 km at 1550 nm. The cable sheath is low-smoke zero-halogen (LSZH) and the product complies with relevant IEC, EIA/TIA or Telcordia standards.

Advantages

The cable combines LC and ST terminations to offer flexible connectivity for mixed-equipment environments. Its OS2 single-mode construction with a 9 µm core provides low attenuation for long-distance transmission. The LSZH jacket reduces toxic gas and smoke emission in case of fire, and the 7 m length covers common rack-to-rack and equipment-to-panel routing needs while the yellow colour allows easy identification in fibre bundles.

Suitable for

• Enterprise network backbones and distribution frames
• Telecom rooms and patch panels
• Server farms and data centre interconnects
• Cloud storage networks and high-speed Ethernet links (1G/10G/40G/100G)

Key specifications

• Product: Microconnect FIB411007
• Cable length: 7 m
• Connectors: LC to ST
• Fibre type: OS2 single-mode, core diameter 9 µm
• Transmission distance: up to 10 km @ 1310 nm; up to 40 km @ 1550 nm
• Jacket: LSZH
• Colour: Yellow
• Weight: 0.058 kg

How to use

Route the Microconnect FIB411007 between equipment or patch panels, ensuring connectors match the corresponding LC and ST ports. Handle the fibre connectors by the boot—avoid touching the ferrule. Before insertion, inspect and, if necessary, clean connector end faces with appropriate fibre cleaning tools. Secure the cable to avoid sharp bends and maintain the manufacturers’ minimum bend radius to prevent signal loss.

Recommendations

Use this single-mode LC–ST patch cable for long-distance and high-speed Ethernet links within telecom rooms and data centres. Store and deploy the cable in clean environments, protect connector end faces with dust caps when not in use, and follow standard fibre handling and safety procedures.