LWL SFP πομποδέκτης BlueOptics UACC-OM-SM-1G-S-1550-BO 3000 m

The BlueOptics UACC-OM-SM-1G-S-1550-BO is a single-mode fiber optic SFP transceiver module designed for 1.25 Gbit/s optical links. Housed in an aluminium case and weighing approximately 20 g, the module supports point-to-point transmission over single-mode fiber up to 3,000 m. The transceiver uses an LC simplex connector and follows industry MSA form-factor standards to ensure physical interchangeability with compatible SFP ports.

Advantages

This BlueOptics transceiver provides supported 1000BASE-BX-D operation with separate transmit and receive wavelengths for single-mode fiber, enabling simultaneous send and receive on a single fiber. The aluminium housing offers mechanical robustness with low weight for easy handling and installation. The module is tested for compatibility with hardware platforms that accept the corresponding SFP type and is suitable for extended operation in network environments that require stable optical links.

Suitable for

Key specifications

How to use

Insert the SFP transceiver into a compatible SFP slot on your switch, router or other network device with the device powered on or as recommended by the equipment vendor. Connect an LC simplex patch cord to the transceiver and route the fiber to the paired transceiver at the remote end. Verify link status in your device management interface and ensure any required software settings or firmware compatibility are met for 1000BASE-BX-D operation. If digital diagnostics (DDM/DOM) are available and supported by the host hardware, enable the monitoring features to read real-time parameters for maintenance and troubleshooting.

Recommendations

For best link performance use single-mode fiber and quality LC patch cords, install the transceiver in equipment that explicitly supports MSA-compliant SFP modules, and confirm host support for bi-directional 1000BASE-BX-D operation and optional DDM/DOM monitoring.