Λωρίδα LED EUROLITE 50530136, 5 m, 5050 SMD RGB, 12 V

EUROLITE 50530136 is a 5-metre RGB LED strip using 5050 SMD LEDs and designed for 12 V DC supply. The tape provides continuous multicolour illumination that can be controlled with compatible RGB controllers to produce static colours, fades and dynamic colour changes. The flexible substrate and adhesive backing enable installation on straight and gently curved surfaces in residential, commercial and display environments where accent lighting, backlighting or decorative effects are required.

Advantages

The 5050 SMD LEDs deliver bright, even light with good colour mixing for clear RGB tones. A 5 m length offers long runs without visible joins when powered and controlled correctly. Low-voltage 12 V operation increases installation options and safety compared with mains-voltage fixtures, and the flexible strip with adhesive backing simplifies mounting on many surfaces. The strip is compatible with a wide range of common RGB controllers and power supplies allowing integration into existing lighting setups.

Suitable for

Key specifications

How to use

Measure the installation area and cut the strip only at marked cut points to obtain the required length. Attach the strip to a clean, dry surface using the adhesive backing or additional mounting clips where needed. Connect the strip to a compatible 12 V DC power supply and an RGB controller according to the controller manufacturer’s wiring diagram, ensuring correct polarity and secure connections. Test the strip at low brightness first, then adjust colours and effects via the controller. For long runs or multiple strips, consider powering the strip from both ends or providing additional feed points to reduce voltage drop.

Recommendations

Use a suitable 12 V DC power supply sized to the total wattage of the strip length and any additional strips. Select an RGB controller that matches the control method you require (IR, RF, DMX or app-controlled) and follow manufacturer guidance for maximum run length and parallel connections. Avoid exposing the strip to direct water unless the product version is rated for moisture protection; install within a compatible profile or channel for improved heat dissipation and a neat finish.