Lindy 0,5m καλώδιο USB 3.2 Type-C σε C, 20Gbit/s, 5A, PD, Anthra Line

The Lindy Anthra Line USB 3.2 Type C to C cable (5A) is designed for reliable high‑performance connections in commercial AV and IT installations. The cable uses triple‑shielded construction with tinned copper conductors and 24K gold‑plated contacts to maintain signal integrity and resist corrosion. It supports USB data bandwidths up to 20 Gbps, E‑marked power delivery up to 100 W (5 A), and DisplayPort Alternate Mode at up to 4K 60 Hz. The reversible USB Type‑C connector enables a bi‑directional connection with automatic host/device negotiation. Available lengths: 0.5 m, 1.0 m and 1.5 m.

Advantages

Triple shielding and tinned copper conductors reduce interference and improve long‑term reliability, while 24K gold plating on contacts helps preserve signal quality. E‑marking allows safe delivery of up to 100 W (5 A) for fast charging and powering devices. The cable supports USB 3.2 data rates up to 20 Gbps and DisplayPort Alternate Mode for video up to 4K 60 Hz, making it suitable for both high‑speed data transfer and AV applications. The reversible Type‑C connector simplifies connections and supports automatic negotiation between host and device.

Key specifications

• Standard: USB 3.2 (supports Gen 1, Gen 2 and Gen 2x2 rates)
• Connector: USB Type‑C to USB Type‑C
• Data rate: up to 20 Gbps
• Power delivery: up to 100 W (5 A), E‑marked
• Video: DisplayPort Alternate Mode up to 4K 60 Hz
• Construction: triple shielded, tinned copper conductors
• Contacts: 24K gold plated
• Available lengths: 0.5 m, 1.0 m, 1.5 m

How to use

Connect one end of the USB Type‑C cable to a compatible host or charger and the other end to the target device. The reversible Type‑C plugs allow insertion in either orientation. The cable will negotiate power and data roles automatically; if the connected devices support USB Power Delivery and E‑marking, power delivery up to 100 W (5 A) is available. For video output, ensure the host and device support DisplayPort Alternate Mode and set the display resolution and refresh rate on the source device as required.

Recommendations

Use the appropriate cable length to minimise excess cable run and avoid signal degradation; choose 0.5 m for short connections near equipment racks or 1.0–1.5 m where more reach is needed. Verify host and device compatibility with USB 3.2 and DisplayPort Alternate Mode to ensure full performance.