LevelOne ΤΡΟΦΟΔΟΤΙΚΟ 12V 1.5A Τροφοδοτικό για FCS-4044 PTZ Dome Network Camera (0R10028)

LEVELONE 0R10028 is an external power supply that delivers 12V DC at 1.50A for compatible networking devices. The adapter provides a compact and portable solution for powering routers, switches and other small network equipment that require a 12V/1.5A input. It is intended to serve as a replacement or spare for existing adapters and for convenient desk- or rack-side use where a stable 12V output is needed.

Advantages

The LEVELONE 0R10028 adapter supplies a steady 12V output at up to 1.50A, offering a reliable power source for devices designed for this voltage and current. Its compact external form factor simplifies installation near the device and reduces the need to open equipment for internal power modules. The adapter is compatible with a range of small networking devices and can be used to replace a lost or damaged original power unit while maintaining consistent voltage delivery.

Suitable for

• Powering routers that require 12V DC and up to 1.5A current draw
• Supplying switches and small network hubs with 12V/1.5A input
• Replacing a factory or lost external adapter with equivalent voltage and amperage
• Desk-side or rack-side power for compact network equipment

Key specifications

• Output voltage: 12V DC
• Maximum output current: 1.50A
• Form factor: external adapter
• Intended use: powering small networking devices such as routers and switches

How to use

Confirm that the target device accepts a 12V DC input and that its required current does not exceed 1.50A. Connect the adapter output plug to the device's power input jack, ensuring polarity and plug size match the device requirements. Plug the adapter into a suitable mains outlet rated for the adapter's input specifications. After connection, verify the device powers on and functions normally. If the device does not power up, disconnect and re-check compatibility and connections.

Recommendations

Use this adapter only with devices that specify a 12V DC input and a current requirement at or below 1.50A. Avoid using the adapter in damp or excessively hot environments, and ensure adequate ventilation around the adapter during operation. If uncertain about plug polarity or connector size, consult the device documentation or manufacturer before use.