Lanberg PCU6-10CC-0750-BK Καλώδιο δικτύου μαύρο 7,5 m Cat6 U/UTP

The Lanberg PCU6-10CC-0750-BK networking cable is a 7.5 m Cat6 U/UTP patch cable with RJ-45 connectors on both ends. Designed for structured cabling in home and office environments, it supports data transmission up to 250 MHz and complies with ISO/IEC 11801 Class E and ANSI/TIA/EIA-568-B recommendations. The cable uses 26 AWG (7 x 0.16 mm) CCA conductors and a PVC outer jacket in black (RAL9004), offering a compact 5.4 mm ±0.2 mm outer diameter for easy routing through cable channels and conduits.

Advantages

The cable combines Cat6 performance with U/UTP construction for uncomplicated installation in typical network environments. Using RJ-45 connectors at both ends ensures broad compatibility with switches, routers, patch panels and network devices. The CCA conductors and PVC jacket provide a balance between electrical performance and cost-efficiency, while the 7.5 m length covers common connection distances without excess slack. The black finish helps integrate the cable into professional or domestic setups where a discreet aesthetic is required.

Suitable for

Key specifications

How to use

Plug the RJ-45 connectors into the corresponding Ethernet ports of your devices, ensuring a secure click to confirm connection. Route the cable along walls, under desks or through cable management channels, avoiding sharp bends and excessive tension to maintain signal integrity. For patching between panels and devices, measure and position the 7.5 m length to minimize slack; if additional length is required, use an appropriate longer patch cable or a network switch to extend the connection.

Recommendations

For best performance, avoid running the cable parallel to power lines or close to strong electromagnetic sources. Maintain bend radii greater than the outer diameter several times over and secure the cable with soft ties or clips to prevent kinks. Inspect connectors for damage before installation and replace cables that show visible wear or connector deformation to ensure reliable network operation.