Λάμες σέγας Bosch T 118 G Basic for Metal 2608631674

The Bosch T 118 G Basic for Metal jigsaw blade is designed for straight cutting in metal. Made from fully hardened, high-speed steel, the blade is suitable for standard-strength, non-perforated sheet metals and for very thin solid sheet metals from 0.5 to 1.5 mm thanks to its very fine 0.7 mm tooth pitch. It is shaped with milled, wavy-set teeth to provide straightforward cuts and fits jigsaws with a T-shank clamping system.

Advantages

The fully hardened high-speed steel construction offers durability and wear resistance. The very fine 0.7 mm tooth pitch enables cutting of thin solid sheets with minimal burrs. Milled, wavy-set teeth provide reliable, straight cuts in metal without special finishing requirements. T-shank compatibility ensures quick, secure blade changes on compatible jigsaws.

Suitable for

• Cutting non-perforated sheet metal
• Cutting very thin solid metal sheets (0.5–1.5 mm)
• Straight cuts in standard-strength metal
• Use with jigsaws that have a T-shank clamping system

Key specifications

• Manufacturer: Bosch
• Model / MPN: 2608631674
• EAN: 3165140007566
• Blade type: T 118 G Basic for Metal
• Material: Fully hardened high-speed steel
• Tooth pitch: 0.7 mm (very fine)
• Recommended material thickness: 0.5–1.5 mm for very thin solid sheets; suitable for standard-strength non-perforated sheet metals
• Shank type: T-shank

How to use

Install the blade into a compatible jigsaw with a T-shank clamping system, following the jigsaw manufacturer’s instructions for secure mounting. Mark the cutting line on the metal, clamp the workpiece to prevent movement, and select an appropriate cutting speed for metal. Guide the jigsaw steadily along the marked line, letting the blade do the cutting without forcing it. After cutting, deburr edges if required.

Recommendations

The blade is intended for straight cuts in standard-strength, non-perforated sheet metal and for very thin solid sheets (0.5–1.5 mm). Use appropriate personal protective equipment, secure the workpiece, and choose a suitable speed and lubricant/cooling if cutting thicker or tougher metals to extend blade life.