Kramer DigiTOOLS FC-7P ψηφιακή μονάδα τηλεχειρισμού I/O 30-80428190

The Kramer DigiTOOLS FC-7P is a compact digital I/O remote control unit that turns simple contact closures or 5V logic signals into RS-232 and RS-485 commands. Unlike generic GPIO boxes, it is built for Kramer's K-Router ecosystem and supports firmware upgrades over RS-232, making it a flexible bridge between physical buttons, sensors, and AV control systems.

Highlights

• 2 digital inputs accept contact closure or 5V logic
• 2 digital outputs: open collector, 5V, 100mA each
• RS-232 (9-pin D-sub female) and RS-485 (3-pin terminal block) control ports
• Selectable baud rates: 9600, 19200, 38400, 57600, 115200 bps
• Compact DigiTOOLS aluminum enclosure, desktop or rack mount with optional RK-TBN

In daily use

Connect a button, motion sensor, or relay to the FC-7P and map it to a command on your RS-232 or RS-485 network. The open collector outputs can drive LEDs, small relays, or other low-current devices. Power is supplied by an external 12V DC adapter, and the unit consumes only 100mA, so it runs cool and quiet.

Full specifications

• Digital inputs: 2 (contact closure or 5V logic)
• Digital outputs: 2 (open collector, 5V, 100mA)
• Control ports: 1 x RS-232 (9-pin D-sub female), 1 x RS-485 (3-pin terminal block)
• Baud rates: 9600, 19200, 38400, 57600, 115200 bps
• Power consumption: 12V DC, 100mA
• Operating temperature: 0°C to +40°C (32°F to 104°F)
• Storage temperature: -40°C to +70°C (-40°F to 158°F)
• Humidity: 10% to 90% RHL, non-condensing
• Firmware upgradeable via RS-232
• Compatible with Kramer K-Router™

Final note

The FC-7P is a straightforward way to add physical I/O to a Kramer control system without adding a full control processor.