Κουτί PC Sharkoon TG6 RGB Midi Tower Μαύρο

The Sharkoon TG6 RGB Midi Tower Black is a mid-tower ATX PC case designed to showcase visible hardware through tempered glass front and side panels while concealing the power supply, HDDs and cable routing. It ships with four pre-installed 120 mm addressable RGB fans (three front, one rear) featuring triple-ring LEDs and includes a removable front fan tray and dust filters to support air- or water-cooling configurations.

Advantages

Triple-ring addressable RGB lighting on each fan provides multilayered illumination across the full RGB spectrum and can be controlled via a built-in 8-port RGB controller or motherboard software with a 5V D-coded header. The modular, screw-free fan frame, rubberized contact points and aerodynamic blades are designed to deliver strong yet quiet airflow. Removable dust filters, a thumbscrew-mounted side panel and a bottom-mounted power supply tunnel help keep the interior tidy and protected while making hardware visible through clear tempered glass.

Suitable for

• Gaming PC builds that showcase RGB components
• Systems using multiple 2.5" SSDs and up to three 3.5" HDDs
• Air-cooled or custom water-cooled systems (radiator up to 360 mm)
• ATX, Micro-ATX or Mini-ITX motherboard installations

Key specifications

• Form factor: Midi Tower (supports ATX, Micro-ATX, Mini-ITX)
• Pre-installed fans: 4 × 120 mm addressable RGB (3 front, 1 rear)
• Drive bays: up to 3 × 3.5" HDD, up to 4 × 2.5" SSD
• Maximum GPU length: 400 mm
• Maximum CPU cooler height: 167 mm
• Maximum PSU length: 205 mm
• Front radiator support: up to 360 mm (with fan tray removed)
• Filters: removable dust filters on air-intake areas
• I/O: 2 × USB 3.2 Gen 1 Type-A, 2 × USB 2.0
• Dimensions (W×D×H): 215 × 452 × 465 mm
• Color: Black

How to use

Install the motherboard (ATX/Micro-ATX/Mini-ITX) on the tray and route cables through the power supply tunnel to keep the interior clean. Connect the addressable RGB fans to the included 8-port controller or to a compatible motherboard header (5V D-coded) for synchronized lighting. If using a front radiator up to 360 mm, remove the front fan tray with its pre-installed fans to make room for the radiator and then mount fans or the radiator as required. Use the removable dust filters to facilitate periodic cleaning without disassembling the case.

Recommendations

For optimal cooling and noise balance, use the three front fans as intake and the rear fan as exhaust; enable motherboard fan control or software to fine-tune fan curves. If you plan to install a large radiator, remove the front fan tray before mounting the radiator to ensure proper clearance. Keep dust filters clean to maintain airflow and component temperatures.