Klevv 16 GB DDR5-RAM PC5600 Klevv CL46 1x16GB

DDR5 Standard Desktop Memory

Next Generation with Us

High Performance DDR5 U-DIMM Memory
Compliant with JEDEC standard boast extreme speed at 5600MT/s, 75% faster than DDR4.

Improved Stability
Maintain data integrity and long-term stability through on-die ECC technology.

QVL Approved for Outstanding Platform Compatibility
QVL approved and compatible with mainstream motherboards/platforms.

Optimized and Improved Power Efficiency
KLEVV DDR5 memory modules feature on-board PMIC for enhanced power supply stability and efficiency.

Overwhelming Performance
Improved DDR5 Memory
KLEVV DDR5 memory module delivers starting speed at 5600MT/s, 75% faster than DDR4.

Lower Voltage, Highly Improved Performance Built-in PMIC
While achieving 20% lower power consumption compared to DDR4 memory, DDR5 memory can reduce dynamic voltage and increase power efficiency, enabling for better power distribution.

Next Generation Performance DDR5
The data bus channel of existing DDR4 memory module is designed to exchange data in a 64-bit single channel, but DDR5 module allows 32-bit data to be exchanged with dual channels. You can also use only one of the two memory channels to increase memory access efficiency as well as the transfer speed.

Fixing Issue from the Chip Itself Improving Stability through On-Die ECC
On-Die ECC (On-Die Error Correction Code) inside the chip allows single-bit correction. It improves application security by enhancing overall data reliability.

QVL Approved
Wide and Reliable Compatibility
KLEVV DDR5 U-DIMM memory has been tested for complete compatibility with all major motherboards in the market. QVL approved and compatible with mainstream motherboards/platforms.

Compliance with Various International Standards
More Reliable User Experience
KLEVV DDR5 U-DIMM memory is produced in compliance with strict safety regulations.
KLEVV followed various international safety standards considering the environment, health, and safety of users.

Klevv U-DIMM. Component for: PC/Server, Internal memory: 16 GB, Memory layout (modules x size): 1 x 16 GB, Internal memory type: DDR5, Memory form factor: 288-pin DIMM

How to use

Power off the system and unplug it from the mains before installing the module. Insert the 288‑pin DIMM into an available compatible DDR5 U-DIMM slot on the motherboard, ensuring the notch aligns with the socket key, and press down evenly until the retention clips lock. After installation, power on the system and verify the memory is recognized in the BIOS/UEFI. For optimal results, consult the motherboard QVL and enable any recommended BIOS settings for DDR5 operation.

Recommendations

Install modules in matched pairs or according to the motherboard manual when possible to take advantage of dual-channel operation and improved memory access efficiency. Refer to the motherboard QVL for validated compatibility and recommended BIOS settings.