Καλώδιο VGA e+p HD15/HD15 15m

The e+p HD15/HD15 VGA cable (15 m) features D-Sub HD15 connectors on both ends and a white molded housing for improved strain relief. It is built with ferrites at both ends and selectively shielded coaxial cores to support HF video signals, providing reliable transmission for monitors, projectors and other VGA-equipped displays in large spaces.

Advantages

The cable includes ferrite beads at each end to reduce electromagnetic interference and molded housings for optimal tension relief. It contains three coaxial leads dedicated to RGB signals plus seven AWG28 signal conductors, and uses selectively shielded coax cores for high-frequency signal integrity over the 15 m length.

Suitable for

• Connecting desktop PCs or laptops to monitors
• Connecting video sources to projectors in conference rooms
• Extending VGA connections across larger rooms or stages

Key specifications

• Length: 15 m
• Connectors: 15-pin HD (VGA) to 15-pin HD (VGA)
• Colour: White
• Cable construction: 3 coax leads for RGB + 7 AWG28 signal leads
• Ferrites: Fitted at both ends
• Shielding: Selectively shielded coaxial cores for HF signals

How to use

Plug each HD15 connector securely into the VGA port of your source device and display, tightening the screws to ensure a firm mechanical connection. Route the cable to avoid sharp bends and heavy pinch points; the molded housings and ferrites help maintain signal quality but correct routing reduces stress and potential interference. For best results, keep the cable away from large power cables and strong RF sources.

Recommendations

For stable video performance over long runs, confirm both devices are set to compatible resolution and refresh rate. If interference persists, try repositioning the cable away from power lines or use additional shielding measures.