Καλώδιο USB Microconnect USB3.1CB2 1,8 m USB-C USB-B 5 Gbit/s μαύρο

The MicroConnect USB3.1CB2 is a 1.8 m USB cable with a USB-C plug on one end and a USB-B plug on the other. It supports USB 3.2 Gen 1 (also marketed as USB 3.1 Gen 1) with a maximum data transfer rate of 5 Gbit/s and is intended to connect external USB 3.2 Gen 1 Type B devices (for example printers or scanners) to a USB host such as a PC, notebook, USB hub or USB wall charger. Nickel-plated contacts and a black jacket provide reliable connection and durability.

Advantages

The cable provides high-speed data transmission up to 5 Gbit/s and full compatibility with USB 3.2 Gen 1 devices using Type B sockets. Nickel-plated contacts improve signal quality and resistance to corrosion. At 1.8 m length the cable offers flexible placement of connected devices while maintaining stable performance. The combination of USB-C and USB-B connectors ensures compatibility between modern hosts and legacy peripherals.

Suitable for

• Connecting printers and multifunction devices with USB Type B ports to laptops or PCs
• Connecting scanners and external drives with USB-B sockets to a USB host
• Use with USB hubs or wall chargers that provide a USB-C host port

Key specifications

• Connector 1: USB C
• Connector 2: USB B
• USB version: USB 3.2 Gen 1 (3.1 Gen 1)
• Maximum data rate: 5 Gbit/s
• Cable length: 1.8 m
• Colour: Black
• Manufacturer: MicroConnect, MPN USB3.1CB2, EAN 5704174932529

How to use

Connect the USB-B end to the external device (printer, scanner or external drive) and plug the USB-C end into the host device (PC, notebook, USB hub or USB wall charger with data capability). Ensure both devices are powered on and that the host recognises the peripheral; install any required drivers if prompted by the operating system. For best performance use ports that support USB 3.2 Gen 1 on both host and device.

Recommendations

For stable high-speed transfers, avoid sharp bends and excessive tension on the cable. Use USB 3.2 Gen 1 capable ports on both ends and keep connectors clean and free of debris. If you experience reduced speeds, verify that both host and peripheral support USB 3.2 Gen 1 and that correct drivers are installed.