Καλώδιο USB EFB Elektronik 5m USB 2.0 M/M γκρι

The EFB Elektronik USB 2.0 cable is a 5 m grey male-to-male lead with a standard USB A connector on one end and a Mini-USB A connector on the other. Designed to support USB 2.0 data transfer rates, this cable is suitable for connecting legacy devices, peripherals and equipment that use a Mini-USB port. The extended length provides flexibility for installations where devices are placed at a distance from USB hosts or chargers while maintaining a straightforward physical connection for data and power.

Advantages

This USB cable supports USB 2.0 signaling for reliable data transfers and charging between compatible devices. The 5 m length reduces the need to reposition equipment and enables tidy routing in workspaces or home setups. With a standard USB A to Mini-USB A configuration and a neutral grey finish, the cable offers broad compatibility with older cameras, GPS units, external drives and industrial devices that use Mini-USB connectors. The male-to-male design ensures direct connection without adapters when both devices accept the corresponding plugs.

Key specifications

• Connector 1: USB A (male)
• Connector 2: Mini-USB A (male)
• USB version: USB 2.0
• Cable length: 5 m
• Colour: Grey

How to use

Connect the USB A plug to a host device such as a computer, laptop or USB charger and insert the Mini-USB A plug into the target device. Ensure both connectors are fully seated to establish a stable connection. When transferring data, allow the host and device to complete any automatic driver installation or pairing procedures. For charging, verify that the host provides sufficient current for the connected device. Avoid forcing connectors and route the cable to prevent sharp bends that could stress the internal conductors.

Recommendations

For dependable data transfer, keep the cable run as free from electromagnetic interference as possible by avoiding parallel routing alongside high-voltage power lines. Use the cable within typical indoor temperature and humidity ranges and replace it if the insulation shows visible damage. For applications requiring higher transfer speeds or future-proofing, consider using USB 3.x or device-specific interfaces where supported.