Καλώδιο τροφοδοσίας ShiverPeaks UK60001 1,8 m με σύνδεσμο IEC C5 (τριφύλλι)

ShiverPeaks Power Cable UK60001 is a 1.8 m mains lead designed to connect wall outlets to devices that use an IEC C5 (cloverleaf) inlet. The cable is intended for use with compatible laptops, power adapters, portable projectors and other small electronics that require a three-pin C5 connection. Its length balances reach and cable management for typical desk, home office and travel setups.

Advantages

The cable delivers standard mains power transmission with a molded IEC C5 connector on the device end and a country-specific mains plug on the supply end, ensuring a secure fit and reliable contact. Constructed with insulated conductors and a flexible outer sheath, the lead is suited for repeated handling and routing without excessive stiffness. Its 1.8 m length provides additional reach compared to shorter leads while remaining compact enough for storage and transport.

Suitable for

• Laptops and notebook power adapters with IEC C5 inlet
• Portable projectors and small AV equipment with cloverleaf connector
• Replacement or spare mains lead for travel and office use
• Workshop or service environments requiring standard mains connectivity

Key specifications

• Cable length: 1.8 m
• Device connector: IEC C5 (cloverleaf), 3-pin
• Supply end: country-specific mains plug for UK power outlets
• Colour: black
• Construction: insulated conductors with flexible outer sheath

How to use

Insert the IEC C5 connector into the device’s matching inlet until it seats firmly. Plug the mains end into a compatible wall socket. Ensure the device inlet and wall socket are undamaged and free from debris before connecting. For safe operation, do not force connectors; if resistance is felt, check alignment and compatibility. Disconnect by pulling the connector bodies rather than the cable to avoid strain on the termination.

Recommendations

Use the cable only with equipment rated for the local mains voltage and grounding requirements. Avoid routing the cable across high-traffic areas to reduce tripping hazards and protect the sheath from abrasion. Store the lead coiled without sharp bends and inspect periodically for damage; replace the cable if insulation is cracked, connectors are loose, or conductors are exposed.