Καλώδιο τροφοδοσίας SATA θηλυκό SATA / 3x αρσενικό 4-Pin Molex 0,15 m InLine 29679

The InLine SATA Power Cable (0.15 m) provides a SATA female connector to feed power from a modern PSU to older peripherals using three 4-pin Molex male connectors. This short, multicolour cable is intended for internal PC use where space is limited and a single SATA power output must supply multiple Molex-powered devices.

Advantages

The cable converts one SATA power output into three Molex power plugs, enabling connection of multiple legacy drives or devices to a single PSU connector. Its 0.15 m length reduces cable clutter in compact cases. The multicolour wiring aids quick identification during installation. The product is compatible with common SATA power pins and standard 4-pin Molex connectors.

Suitable for

• Connecting legacy IDE/PATA hard drives or optical drives that use 4-pin Molex power
• Supplying power to multiple Molex-powered accessories from one SATA power cable
• Compact PC builds where short internal cables are required

Key specifications

• Connector A: SATA power (female)
• Connector B: 3 × 4-pin Molex (male)
• Cable length: 0.15 m
• Product colour: Multicolour
• Brand: InLine
• MPN: 29679
• EAN: 4043718099740

How to use

Shut down the PC and disconnect the power supply before installing the cable. Plug the SATA female end onto an available SATA power connector from the power supply. Connect the 4-pin Molex male plugs to the corresponding Molex sockets on drives or other peripherals, ensuring correct orientation to avoid pin misalignment. Reconnect power and power on the system to verify the devices receive power.

Recommendations

Use this adapter only inside the computer case for internal peripherals. Avoid excessive bending near connectors and ensure the PSU is switched off when connecting or disconnecting the cable. Do not attempt to power devices that exceed the power capacity of the single SATA power rail used.