Καλώδιο τροφοδοσίας ProXtend Type K Δανίας Ανοιχτό άκρο 1m

The ProXtend Type K Denmark Open End 1m power cord provides a 1 metre connection with a straight Type K male plug on one end and an open end on the other for custom termination. The cable uses H05VV-F construction with a PVC jacket, three cores of 32 conductors each and a core cross-section of 1 mm². It is rated for 250 V and 16 A and is intended for use where Type K plugs are required, commonly in Denmark and Greenland.

Advantages

The cable combines a standard Type K plug with an open end to allow flexible, custom installation. H05VV-F construction with PVC insulation provides basic mechanical protection and ease of routing. The 1 m length and white colour suit short-distance connections and installations where a discreet appearance is needed. Specified ratings of 250 V and 16 A match common household and light commercial appliances compatible with Type K.

Suitable for

• Powering appliances and equipment in Denmark and Greenland using Type K connections
• Custom cable assemblies and field termination where an open end is required
• Short-distance power connections up to 1 metre

Key specifications

• Brand: ProXtend
• Model / MPN: PC-KOE-001W-M
• EAN: 5714590008708
• Connector 1: Power plug type K (straight male)
• Cable type: H05VV-F
• Cores: 3 cores, each 32 conductors
• Core cross-section: 1 mm²
• Voltage rating: 250 V
• Current rating: 16 A
• Length: 1 m
• Colour: White

How to use

Connect the Type K male plug to a compatible Type K socket in Denmark or Greenland. Terminate the open end to the required connector or device following local wiring colour codes and safety standards. Ensure all connections are secure, insulated and comply with applicable electrical regulations before applying power. Use the cord only within its rated voltage and current limits.

Recommendations

Inspect the cable and terminations for damage before use. For permanent installations or where higher mechanical or environmental protection is required, use a cable type with appropriate ratings and consult a qualified electrician for termination and compliance with local electrical codes.