Καλώδιο τηλεφώνου ShiverPeaks BS70046 6 m μαύρο

The ShiverPeaks BS70046 6 m Black telephone cable connects devices with a TAE (F) socket to equipment using an RJ-11 plug. With a 6-metre length and a straightforward two-connector design, it is intended to provide a stable wired connection for landline telephones, fax machines and other voice/data devices that use standard RJ-11 interfaces. The black outer jacket offers a discreet appearance suitable for home and office environments.

Advantages

This telephone cable offers a contact-ready TAE (F) connector on one end and a standard RJ-11 plug on the other to ensure compatibility with many European telephone sockets and common telephone equipment. The 6 m length gives flexibility in device placement without the need for extensions, and the single-core cable construction supports clear voice transmission. The black finish minimizes visual distraction and blends with existing cabling.

Suitable for

• Connecting a landline telephone to a wall TAE (F) socket
• Linking fax machines or modems to telephone lines with RJ-11 connectors
• Temporary or permanent installations in homes and small offices

Key specifications

• Cable length: 6 metres
• Connectors: TAE (F) to RJ-11
• Colour: Black
• Intended signals: analogue telephone voice and compatible low-speed data

How to use

Insert the TAE (F) connector into the corresponding wall socket and plug the RJ-11 connector into the telephone, fax or modem. Ensure connectors are fully seated and avoid bending the cable sharply near the ends. Route the cable along skirting boards or cable channels to keep it tidy and prevent tripping hazards. If you need a different orientation, reposition the connected devices within the 6 m reach of the cable.

Recommendations

For best performance, keep the cable away from high-voltage power lines and strong electromagnetic sources. If connecting to devices with different connector standards, use an appropriate adapter rather than forcing incompatible plugs. Inspect connectors occasionally for dust or wear and replace the cable if you notice intermittent connection or physical damage.