Καλώδιο σύνδεσης δορυφόρου ShiverPeaks 80092MHQ 1,50 m

ShiverPeaks Satellite Connection Cable 80092MHQ 1.50 m is a coaxial cable intended for connecting satellite LNBs, set-top boxes and satellite receivers over a short fixed distance. With a 1.50 m length, the cable provides a direct link for signal transmission between outdoor dish components and indoor receiving equipment. The construction is suitable for typical indoor installations and brief outdoor routing where a compact, ready-length coax is required to join satellite devices.

Advantages

The cable offers a standard coaxial connection compatible with common satellite F-type connectors and is supplied at a convenient 1.50 m length to eliminate excess cable slack. Its design reduces the need for adapters or custom cable runs when linking an LNB to a receiver or set-top box over short distances. The product is straightforward to install and integrates with existing satellite setups without altering signal routing or equipment configuration.

Suitable for

• Connecting satellite LNB to a receiver or set-top box over short distances
• Indoor installations and short outdoor runs between dish and indoor equipment
• Replacing worn or damaged 1.5 m coax leads in home satellite systems

Key specifications

• Type: coaxial satellite cable
• Length: 1.50 m
• Connector compatibility: standard satellite F-type interface
• Application: signal transmission between LNB and receiver/set-top box
• Suitable environment: indoor and short outdoor routing

How to use

Ensure both the satellite dish LNB and the receiver or set-top box are powered off before connecting. Attach one end of the coaxial cable to the LNB output and the other end to the receiver's satellite input, securing the threaded F-type connectors by hand until snug. Avoid over-tightening. Route the cable to prevent sharp bends, kinks or pinching, and keep it clear of high-traffic areas. After connection, power on the equipment and check signal strength and channel reception in the receiver menu.

Recommendations

For best results, use this 1.50 m cable for short, direct connections inside the building or for brief outdoor runs; if longer runs or permanent outdoor exposure are required, select a longer cable with appropriate outdoor-rated shielding and weatherproof connectors.