Καλώδιο server MITAC 1U CPU για υποστήριξη 12 NVMe SSD (Kit CYPCBLSL112KIT_99A5A8)

This MITAC server cable kit provides a 1U form-factor connection from the CPU area to support up to 12 NVMe SSDs. Designed for dense server environments, the kit simplifies cable routing and ensures consistent electrical and mechanical connectivity between the motherboard/CPU zone and multiple NVMe drives. The kit is intended for use in rack-mounted 1U server chassis where space is constrained and high-density storage is required.

Advantages

The kit is engineered to fit 1U server layouts, reducing cable clutter and improving airflow by providing a compact, purpose-built routing solution. It supports a high-density NVMe configuration of up to twelve drives, enabling efficient use of front or rear drive bays without complicated ad hoc cabling. The design emphasizes secure connectors and organized pathways to help maintain signal integrity in high-performance storage arrays.

Suitable for

• Rack-mounted 1U servers requiring multiple NVMe SSDs
• High-density storage arrays in data centers
• Server upgrades where consolidated cable routing is needed
• Systems requiring reliable, repeatable NVMe connectivity in tight spaces

Key specifications

• Form factor compatibility: 1U server chassis
• Supported drive type: NVMe SSD (up to 12 devices)
• Connection orientation: CPU/motherboard area to NVMe drive bays
• Cable design: multi-cable kit optimized for dense routing and minimal profile
• Connector characteristics: secure, mechanically keyed connectors for reliable mating

How to use

Install the cable kit by routing the bundled cables from the CPU/motherboard area to the NVMe drive support locations according to the server chassis layout. Ensure connectors are aligned and fully seated before applying system power. Follow any server manufacturer guidance for drive population order and retention hardware to maintain chassis airflow and cooling. Verify that drive detection and NVMe device enumeration occur in system firmware or operating system after physical installation.

Recommendations

When installing in a 1U server, keep cable paths tight to chassis panels to maximize airflow and avoid obstructing fans or air channels. Verify compatibility with the server chassis and motherboard layout before installation, and ensure connectors are handled gently to prevent bent pins or misalignment. For high-performance deployments, confirm that system cooling and power provisioning are sufficient for the populated NVMe configuration.