Καλώδιο SCART ShiverPeaks 96005 1,5 m 21 ακίδων

SCART cable ShiverPeaks 96005 1.5 m 21-pin is a single-cable audio/video connection designed for legacy AV devices that use the 21-pin SCART interface. With a 1.5 m length and fully compatible 21-pin connectors, the cable supports composite video, RGB video and stereo audio signals where devices implement the SCART standard, enabling straightforward connections between TVs, DVD players, set-top boxes and other compatible equipment.

Advantages

The cable combines video and stereo audio conductors into one connector, reducing cable clutter and simplifying setup for legacy home entertainment systems. Its 1.5 m length provides a practical reach for common placement of AV components. The design includes shielded coaxial conductors for video and grounded shielding to reduce interference in typical domestic environments.

Suitable for

• Connecting a DVD player to a television that supports SCART
• Linking set-top boxes or satellite receivers to legacy displays
• Routing composite or RGB video and stereo audio between compatible AV devices
• Temporary or permanent connections in home entertainment setups that require a 1.5 m SCART lead

Key specifications

• Cable length: 1.5 m
• Connector type: 21-pin SCART (male-to-male)
• Signals supported: composite video, RGB video, stereo audio
• Conductor configuration: stereo audio pairs and coaxial video lines
• Shielding: individual shielding for video coaxial lines and overall cable shielding to reduce interference
• Impedance for video coaxial lines: 75 Ohm

How to use

Ensure both devices to be connected are powered off before plugging in the cable. Align the 21-pin SCART connectors with the SCART sockets on each device and insert firmly until fully seated. Power on the devices and select the appropriate input on the display device. If using RGB output, verify that both source and display support RGB over SCART and check device settings if no image appears.

Recommendations

For optimal signal quality, avoid running the SCART cable parallel to mains power cables and keep the run as short as practical; 1.5 m is intended for close-proximity component placement. Inspect connectors for damage before use and ensure a secure fit to prevent intermittent audio or video issues.