Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

Καλώδιο SAS Digitus DK-127008

Καλώδιο SAS Digitus DK-127008
Καλώδιο SAS Digitus DK-127008
29,85 €
The DIGITUS SAS Cable DK-127008 is a mini SAS 36-pin high-speed interconnect designed for reliable connection between SAS host controllers and storage devices. The cable features mini SAS connectors on both ends and a two-tone black and red jacket that provides clear visual identification in server ... Περισσότερα
Απόθεμα 5 Κωδικός 1473000 Μάρκα DIGITUS Μοντέλο DK-127008 Εγγύηση 2 χρόνια

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Τρίτη, Οκτωβρίου 27
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

The DIGITUS SAS Cable DK-127008 is a mini SAS 36-pin high-speed interconnect designed for reliable connection between SAS host controllers and storage devices. The cable features mini SAS connectors on both ends and a two-tone black and red jacket that provides clear visual identification in server racks and storage arrays. It is engineered to support the data integrity and signal stability required by multi-drive storage environments.

Advantages

This mini SAS cable provides a stable signal path with shielding and connector retention designed to reduce interference and maintain consistent transfer rates. The compact mini SAS 36-pin form factor allows for dense cabling in space-constrained installations while maintaining reliable mechanical engagement. The construction and connector plating are selected to withstand repeated insertions and typical data center handling.

Key specifications

  • Connector type: mini SAS 36-pin on both ends
  • Cable colors: black and red jacket for visual identification
  • Designed for Serial Attached SCSI (SAS) interfaces
  • Construction features shielding and secure connector latches
  • Suitable for multi-lane SAS data rates typical for 3.0/2.0 environments (dependent on system capabilities)

How to use

Plug each mini SAS 36-pin connector firmly into the corresponding SAS port on the host controller and the target storage device, ensuring the connector latch engages. Route the cable to avoid excessive bending or tension, and secure it in the rack to prevent strain on the connectors. Verify device detection in the host system and perform any required RAID or disk configuration through your storage management software.

Recommendations

For optimal performance, use the DIGITUS SAS cable in environments matching your controller and drive speed capabilities, avoid sharp bends near the connector ends, and periodically inspect connectors for debris or damage. When installing in dense arrays, label both ends for easier service and maintain proper airflow around cabling.

Κύρια σημεία
  • Соединение SAS-контроллеров с жёсткими дисками и SSD в серверах
  • Подключение в RAID-массивах и системах хранения данных
  • Использование в стойках и корпусах с плотной укладкой кабелей
  • Connector type: mini SAS 36-pin on both ends
  • Cable colors: black and red jacket for visual identification
  • Designed for Serial Attached SCSI (SAS) interfaces
  • Construction features shielding and secure connector latches
  • Suitable for multi-lane SAS data rates typical for 3.0/2.0 environments (dependent on system capabilities)
Χαρακτηριστικά
Βύσμα 1
mini SAS 36-pin
Βύσμα 2
mini SAS 36-pin
Χρώμα προϊόντος
Black, Red
Ιστορικό τιμών τους τελευταίους 6 μήνες
Καλώδιο SAS Digitus DK-127008
Τρέχουσα
29,85 €
Χαμηλότερη
29,38 €
Υψηλότερη
29,85 €
Μεταβολή 24 ωρών
+0,36 €   +1%
Εβδομάδα
+0,29 €   +1%
Μήνας
—   

Δημοφιλή προϊόντα σε αυτή την κατηγορία

Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.