Καλώδιο patch MPO-4xLC πολύτροπο OM4 BlueOptics G2LJX6V 1 μέτρο

The BlueOptics MPO-4xLC Multimode OM4 Patch Cable BlueOptics G2LJX6V 1 Meter is a short-length multimode fiber patch cord engineered for high-density network environments. This 1 m cable uses OM4 graded multimode fiber and an MPO to 4x LC breakout configuration to support parallel optical links and duplex connections in modern data center and enterprise networking setups. The design focuses on consistent insertion loss, accurate fiber mapping and robust connector housings to maintain signal integrity for high-speed links.

Advantages

The MPO to 4x LC configuration simplifies migration between MPO-based trunk lines and LC-terminated equipment, reducing required housings and panel space. OM4 multimode fiber provides improved modal bandwidth for short- to medium-distance multimode applications, enabling higher aggregated throughput when used with parallel optics transceivers. Compact 1 m length reduces excess slack in dense patching areas and helps maintain orderly cabling infrastructure.

Suitable for

Key specifications

How to use

Install the MPO end into the corresponding MPO trunk or cassette, ensuring correct key orientation and alignment. Connect the four LC duplex connectors to the target LC ports on transceivers, patch panels or active equipment, matching transmit and receive pairs according to your network mapping. Manage the 1 m cable length in patching trays or cable managers to avoid tight bends and to maintain minimum bend radius. Perform continuity and insertion loss tests after installation to verify correct channel mapping and acceptable optical performance.

Recommendations

Store and handle the cable to avoid excessive bending, pulling or twisting. Use appropriate MPO cleaning tools and lint-free wipes for connector endfaces before mating. For 40/100 Gigabit or other parallel optics deployments, verify transceiver and cabling compatibility with OM4 specifications and perform end-to-end testing to ensure link budget compliance.