Καλώδιο οθόνης ShiverPeaks 78056-30 S-VGA 30 m θωρακισμένο 2×15 ακίδων

ShiverPeaks 78056-30 S‑VGA 30 m shielded 2×15‑pin is a 30‑metre analog monitor cable designed to extend VGA/SVGA video signals between a computer video output and a monitor, projector or KVM device. The cable features two 15‑pin connectors and full shielding to minimize electromagnetic interference over long runs, providing a practical solution when a 30 m connection is required.

Advantages

The shielded construction and 75 Ω impedance reduce signal degradation and external interference on long runs. Molded connector housings and integrated ferrite cores improve connector durability and suppress high‑frequency noise. The 2×15‑pin S‑VGA connectors ensure compatibility with standard analog VGA/SVGA ports on computers, monitors and projectors, enabling straightforward plug‑and‑play connectivity.

Suitable for

• Extending VGA/SVGA video between a PC and a monitor at distances up to 30 m
• Connecting a computer to a projector for presentations in conference rooms or classrooms
• Linking video outputs to KVM switches or signal distribution equipment where analog input is required

Key specifications

• Cable length: 30 m
• Connector type: 2 × 15‑pin S‑VGA (analog VGA/SVGA)
• Impedance: 75 Ω
• Shielding: fully shielded cable construction
• Ferrite: integrated ferrite cores for high‑frequency noise suppression
• Connector housings: molded/encapsulated for mechanical protection
• Color: black

How to use

Connect one 15‑pin S‑VGA plug to the video output on the source device and the other 15‑pin plug to the display device, ensuring secure seating of the molded connector housings. Tighten any thumbscrews if present to maintain a stable mechanical connection. Use the cable routing that avoids sharp bends and keeps distance from strong electromagnetic sources when possible. For optimal performance, allow the integrated ferrite cores to remain close to the connected devices where they will most effectively suppress interference.

Recommendations

For best signal quality over 30 m, avoid running the cable in parallel with high‑power electrical lines and maintain gentle bend radii. Verify display resolution and refresh rate compatibility between source and display, as very high resolutions may be limited by analog signal characteristics over long runs.