Καλώδιο Οπτικών Ινών Duplex LC/LC InLine 50/125µm OM3 15m

The InLine Fiber Optical Duplex Cable LC/LC 50/125µm OM3 15m is a multimode duplex patch cable designed for reliable high-speed data transmission in structured cabling and network equipment interconnects. With LC connectors on both ends and an OM3-rated 50/125 µm core/cladding construction, this 15-meter cable supports full-duplex links and is intended for use in modern data center, server rack and telecom installations where low attenuation and consistent optical performance are required.

Advantages

This LC/LC fiber duplex cable offers precise alignment and low insertion loss thanks to quality LC connectors and OM3 multimode fiber. The 50/125 µm core diameter provides compatibility with a wide range of multimode transceivers and active devices, while the OM3 specification enables higher modal bandwidth and support for higher data rates over moderate distances. The 15 m length gives flexibility for rack-to-rack or equipment-to-equipment connections without the need for splices.

Suitable for

• Data center interconnects and patch panels
• Server rack cabling and switch-to-switch connections
• Multimode fiber links for enterprise LAN and campus networks
• Telecom equipment installations requiring LC/LC duplex connections

Key specifications

• Fiber type: Multimode OM3
• Core/cladding diameter: 50/125 µm
• Connector type: LC to LC duplex
• Length: 15 m
• Polarity: Full duplex (paired fibers)
• Typical application: Short- to medium-range multimode links

How to use

Inspect connector end faces for cleanliness and, if necessary, clean with approved fiber cleaning tools before installation. Route the cable to avoid sharp bends and maintain bend radius guidelines for multimode fiber. Plug LC connectors into corresponding LC ports on transceivers, patch panels or network equipment, ensuring correct polarity for duplex operation. Secure the cable along racks or trays using appropriate cable management accessories to prevent strain on connectors and to maintain performance.

Recommendations

For optimal performance, keep connector end faces clean and avoid bending the cable beyond its minimum bend radius. Use OM3-compatible transceivers and verify link performance with an optical power meter or certification tester when deploying in critical installations.