Καλώδιο οπτικών ινών CBO BlueOptics SFP3233FU2MK 2 m SC–ST OM4 μωβ πολύτροπο

CBO BlueOptics SFP3233FU2MK is a 2 m fiber optic patch cable with an SC connector on one end and an ST connector on the other, built for OM4 multimode links. The violet outer jacket identifies the cable for high-density installations and helps distinguish OM4 multimode runs. This 2 m SC–ST fiber lead is intended for short-range, high-bandwidth connections between SFP transceivers, patch panels and active equipment in data centers, telecom racks and enterprise network rooms.

Advantages

The cable complies with OM4 multimode specifications to support higher modal bandwidth and improved short-range performance compared with lower-grade multimode fibers. Its SC connector provides a push-pull coupling for secure connections, while the ST connector offers a bayonet-style interface commonly used on networking equipment. The 2 m length balances reach and cable management in racks and patching environments, and the violet jacket improves visual identification and cable routing.

Suitable for

Key specifications

How to use

Route the cable between the SFP transceiver-equipped device and the target port or patch panel, ensuring connectors are clean before insertion. Insert the SC connector with a straight push until it clicks into the adapter or port. Align the ST connector, insert, and twist the bayonet sleeve to lock it in place. Avoid tight bends near the connectors and secure the cable to cable management pathways to prevent strain. For best performance, keep insertion losses low by using clean adapters and by avoiding unnecessary mated connector pairs.

Recommendations

Inspect and clean connector endfaces with suitable fiber cleaning tools before each connection, maintain bend radius recommendations for multimode fiber, and label both ends in rack environments to simplify maintenance and reduce the risk of accidental disconnection.