Καλώδιο οπτικών ινών BlueOptics CBL-LC-OM4-10M-BO 10m LC σε LC 50µm

The BlueOptics CBL-LC-OM4-10M-BO is a 10 meter multimode fibre optic patch cable with LC connectors on both ends and a 50 µm core diameter. Designed for high-speed data transmission, this OM4 cable supports full-duplex links and is intended for interconnection of patch panels, network transceivers and other optical components in data centres and enterprise network environments. The cable features a blue outer sheath and is manufactured to meet common industry requirements for multimode OM4 performance.

Advantages

This LC-to-LC OM4 cable provides laser-optimized multimode fibre designed for high bandwidth and longer reach compared with lower-grade multimode types. The 10 m length offers flexibility for routing between equipment racks or within patching areas. The cable is supplied with a low-smoke, halogen-free (LSZH) sheath for reduced smoke and no halogen emissions in case of fire. Each cable is tested after production for optical performance including input loss and return loss, and comes with measurement data to document typical attenuation and link quality.

Suitable for

• Connecting optical transceivers to patch panels in data centres
• Interconnecting switches and network equipment within server rooms
• High-bandwidth multimode links for enterprise LANs and campus networks
• Patching and fibre management in telecom or IT racks

Key specifications

• Length: 10 metres
• Fibre type: OM4 multimode (laser-optimized)
• Core diameter: 50 µm
• Connector type: LC to LC
• Sheath: LSZH (low smoke, zero halogen)
• Duplex communication: supported

How to use

Verify the fibre type and connector compatibility of your network equipment before installation. Route the 10 m LC–LC cable between the appropriate LC ports on transceivers, patch panels or switch modules, taking care to avoid tight bends and excessive tensile load. Ensure dust caps are removed from connectors just prior to mating and clean connector endfaces with suitable fibre cleaning tools to maintain low insertion loss. After installation, validate link performance with appropriate test equipment or review the supplied measurement protocol for input loss and return loss.

Recommendations

For best long-term performance, store and handle the cable to avoid sharp bends (observe minimum bend radius), keep connector endfaces clean, and use labelled routing within racks to simplify maintenance and prevent connector strain.