Καλώδιο κεραίας/τηλεόρασης ShiverPeaks 80094-SPB 3,75 m

The ShiverPeaks 80094-SPB 3.75 m Antenna/TV cable provides a fixed-length coaxial connection for distributing terrestrial TV and antenna signals between antenna points, set-top boxes and television receivers. With a 3.75 metre length, the cable is intended for mid-range installations in home AV systems, wall-mounted TVs, or media cabinets where a stable, shielded connection is required. The construction is designed to maintain signal quality over the stated distance and to fit standard F-type coaxial connectors used in consumer television equipment.

Advantages

This antenna/TV cable offers a single-piece, pre-measured solution that removes the need for on-site cutting or termination. The cable is optimized for simple, in-home installations and provides consistent impedance to reduce signal reflections and losses across its length. Its fixed 3.75 m length simplifies planning and routing in living rooms, bedrooms or small installations where predictable cable runs are preferred.

Suitable for

• Connecting a rooftop or indoor antenna to a television
• Linking a set-top box or tuner to a TV or AV receiver
• Fixed-length cabling behind wall-mounted or stand-mounted TVs
• Temporary setups or testing where a mid-length coaxial lead is required

Key specifications

• Cable type: coaxial antenna/TV cable
• Length: 3.75 m
• Connector compatibility: standard consumer coaxial connectors (F-type compatible)
• Intended signal: terrestrial TV and antenna signals
• Use case: indoor AV installations and short to mid-range signal runs

How to use

Connect one end of the ShiverPeaks 3.75 m antenna cable to the antenna output or wall socket and the other end to the antenna input on the television, set-top box or tuner. Ensure connectors are tightened by hand until secure; avoid over-tightening with tools to prevent damage to connector threads. Position the cable to minimise sharp bends and keep it away from parallel runs of power cables where possible to reduce interference. Once connected, perform a channel scan on the receiver to confirm signal reception and alignment.

Recommendations

For optimal reception, route the cable with gentle curves rather than tight bends and avoid coiling excess length near the receiver. If longer runs or outdoor exposure are required, select a purpose-built outdoor-rated or amplified solution. Inspect connectors periodically for corrosion or looseness and replace the cable if physical damage or persistent signal loss occurs.