Καλώδιο ηχείου Omnitronic 3022110M, αγωγοί 2x1,5 mm², 5 m, μαύρο

Omnitronic 3022110M is a 5 m speaker cable with two 1.5 mm² conductors in black designed to connect loudspeakers to amplifiers, receivers or other audio outputs. The cable offers flexible insulation and standard polarity marking to simplify installation and routing while maintaining reliable signal transmission for home audio systems or small professional setups.

Advantages

The cable combines moderate conductor cross-section with flexibility suitable for tight runs and easy handling. Standard polarity marking reduces the chance of phase errors during setup. The 5 m length covers common distances between speakers and amplification equipment without excessive slack, and the black outer sheath provides a neutral appearance for visible installations.

Suitable for

Key specifications

How to use

Strip approximately 6–8 mm of insulation from each conductor and attach to the speaker and amplifier terminals following the polarity marking to ensure correct phase. For banana plugs or spade lugs, prepare the conductors according to the connector manufacturer's instructions and secure firmly. Route the cable away from power cords to minimise potential interference and avoid sharp bends or pinching which can damage the insulation or conductors.

Recommendations

For best audio performance, keep cable runs as short as practical and use the 1.5 mm² conductor for speakers with moderate power requirements. Verify polarity at both ends before finalising installation and avoid running the speaker cable parallel to mains power cables for long distances.