Καλώδιο ηχείων InLine 98310T 2x 2,5mm² CCA Διαφανές 10m

The InLine 98310T speaker cable is a 10 m, transparent two-conductor cable with 2 x 2.5 mm² Copper-Clad Aluminium (CCA) conductors. It is designed for low-voltage audio connections between amplifiers and passive speakers in home and professional audio setups. The cable is supplied without connectors and offers a lightweight, flexible construction for easy routing and installation.

Advantages

CCA conductors provide a balance of conductivity and reduced weight compared with pure copper, while the 2 x 2.5 mm² cross-section supports reliable signal transmission for typical speaker loads. The transparent jacket allows discreet installation, and the 10 m length covers common speaker placement needs. The cable’s flexibility simplifies handling during installation.

Suitable for

• Connecting passive speakers to amplifiers in home audio systems
• Installations in small public-address or background-music setups (non-100V systems)
• Temporary or permanent speaker wiring where concealment is desired

Key specifications

• Brand: InLine
• Model: 98310T
• Length: 10 m
• Conductor type: Copper-Clad Aluminium (CCA)
• Conductor size: 2 x 2.5 mm²
• Connectors: None (sold as bare cable)
• Color: Transparent
• EAN: 4043718128020

How to use

Cut the cable to the required length and strip the outer jacket and conductor insulation to expose the cores. Connect each conductor to the corresponding speaker and amplifier terminals (observe polarity). Route the cable along baseboards, through cable channels, or behind furniture as needed. Ensure secure terminations and avoid sharp bends or kinks that could damage the conductors.

Recommendations

Do not use this speaker cable for 100 V electroacoustic (ELA) systems or where specific certified cables are required. For best performance, keep cable runs as short as practical and ensure polarity is consistent between amplifier and speaker terminals.