Καλώδιο HDMI Vivolink PROHDMIFUHD7.5 7,5 m HDMI Type A (Standard) μαύρο

The Vivolink PROHDMIFUHD7.5 is a 7.5 m HDMI Type A cable engineered for high-resolution video and audio transmission. Compliant with HDMI 2.1 and supporting a 48 Gbit/s bandwidth, this cable enables Ultra High-Speed connections with Dynamic HDR and enhanced Audio Return Channel (eARC). It supports resolutions up to 10K and refresh rates up to 120 Hz while remaining backwards compatible with earlier HDMI versions.

Advantages

Gold-plated connectors ensure reliable contact and reduced signal loss. The 48 Gbit/s data rate and HDMI 2.1 support allow for high-resolution, high-refresh-rate content including 8K@60Hz and up to 10K. eARC and Dynamic HDR support provide improved audio passthrough and richer picture quality. The 7.5 m length gives flexibility for connecting TVs, projectors, and gaming consoles where longer cable runs are needed.

Suitable for

• Connecting 8K or 4K TVs to set-top boxes, receivers, or streaming devices
• Linking gaming consoles and PCs to high-refresh-rate displays
• Hooking up projectors in home theater or conference-room setups
• Integrating AV receivers with TVs using eARC for high-quality audio

Key specifications

• Length: 7.5 m
• Connector type: HDMI Type A (standard)
• HDMI version: 2.1
• Bandwidth: 48 Gbit/s
• Supported resolutions: up to 10K
• Max refresh rate: up to 120 Hz
• Features: Dynamic HDR, eARC, 3D support
• Connectors: gold-plated
• Colour: Black

How to use

Insert one HDMI Type A connector into the HDMI output of your source device (for example a Blu-ray player, console or PC) and the other connector into the HDMI input of your display device (TV, projector or AV receiver). Ensure both devices support the desired HDMI features (for example HDMI 2.1, eARC or specific resolution/refresh rate) and select the correct HDMI input on your display. For optimal performance, avoid sharp bends and keep the cable away from strong electromagnetic interference sources.

Recommendations

For full 8K@60Hz or 4K@120Hz performance, verify that both the source and display support HDMI 2.1 features and that device firmware is up to date. Use cable lengths appropriate for your setup to minimize signal degradation; for runs longer than 7.5 m consider active or certified optical HDMI solutions if required by your installation.