Καλώδιο DMX combo EUROLITE 30227780 P-Con σε 3-πολικό XLR, 1,5 m

EUROLITE 30227780 P-Con to 3‑pin XLR kombi cable is a 1.5 m DMX lead that combines a P-Con connector with a standard 3‑pin XLR socket. It is intended for routing DMX512 control signals between lighting controllers, dimmers and fixtures where a P-Con style connection is used at one end and a conventional XLR at the other. The single-cable design reduces clutter and simplifies connections during live events, studio work and temporary or permanent stage installations.

Advantages

The cable integrates power/connection form factor P-Con with a 3‑pin XLR DMX interface in a compact 1.5 m length, allowing quick, reliable links between mixed-equipment setups. Constructed to industry standards for DMX512 signal continuity, it minimizes signal loss and interference for consistent control of fixtures. The mating connectors are conventional types that are easy to attach and detach, supporting rapid setup and teardown in event environments.

Suitable for

Key specifications

How to use

Connect the P-Con end to the device that provides the P-Con interface and insert the 3‑pin XLR into the DMX input or output of the controller or fixture as required by your signal flow. Ensure both devices are powered off when making connections if required by the equipment manuals, then power up and verify DMX addressing and signal presence using the controller or a DMX tester. Route the cable to avoid sharp bends and exposure to mechanical strain.

Recommendations

For reliable performance, use this kombi cable for short-distance links and in conjunction with proper DMX termination where necessary. Avoid running the cable parallel to mains power runs for long distances to reduce the risk of interference, and store the cable coiled without tight kinks when not in use.