Καλώδιο δικτύου Schwaiger CKO8050 531 RJ-45 Cat8 5 m Μπλε

The SCHWAIGER CKO8050 531 Cat8 networking cable is a 5 m blue cable with RJ-45 connectors on both ends, designed for high-speed wired networks. It supports the Cat8 standard and 40GBase-T cabling technology for data transfer rates up to 40000 Mbit/s and uses S/FTP shielding to reduce electromagnetic interference. A molded strain relief at each connector improves durability and helps prevent cable breakage.

Advantages

The cable's Cat8 specification and 40GBase-T compatibility enable high data throughput suitable for demanding network environments. S/FTP shielding provides enhanced protection against crosstalk and external noise. Molded strain relief on the RJ-45 connectors increases mechanical robustness and extends service life. The 5 m length offers flexibility in device placement while the blue colour aids cable identification.

Suitable for

• Connecting a PC to a gigabit or faster network socket
• Linking switches, hubs or routers within local networks
• Point-to-point connections to ADSL/TDSL splitters or network outlets
• High-speed data transfers and server connections in home or small office setups

Key specifications

• Standard: Cat8
• Cabling technology: 40GBase-T
• Maximum data rate: up to 40000 Mbit/s
• Length: 5 m
• Connectors: RJ-45 — both ends
• Shielding: S/FTP
• Colour: Blue
• Weight: 0.183 kg
• Brand: SCHWAIGER, MPN: CKO8050 531, EAN: 4004005024357

How to use

Insert the RJ-45 connector at one end of the cable into the network port of your computer or device and the other end into a compatible network socket, switch, router or splitter. Ensure connectors are fully seated until the locking tab clicks. Route the cable to avoid sharp bends and secure it to prevent strain on the connectors. Verify network settings on connected devices if a link is not immediately established.

Recommendations

For optimal performance, use this Cat8 cable for short to medium runs (such as within rooms or between racks) and avoid running it parallel to power cables to minimise interference. Inspect connectors regularly for damage and replace the cable if the shielding or strain relief is compromised.