Καλώδιο δικτύου EFB Elektronik K8093.30 RJ-45 Cat5e 30 m πράσινο

The EFB Elektronik K8093.30 RJ-45 Cat5e networking cable is a 30 m green U/UTP cable designed for wired Ethernet connections. It uses RJ-45 connectors on both ends and supports Cat5e performance levels with gold-plated contacts. The cable offers data transmission rates up to 2500 Mbit/s and is intended for installation in home, office, and commercial network setups where reliable copper cabling is required.

Advantages

This Cat5e cable combines U/UTP construction with gold-plated RJ-45 connectors to provide consistent signal quality and reduced contact corrosion. The 30 m length allows flexible placement of network devices without additional couplers, and the green sheath makes cable routing and identification easier in multi-cable environments. Cat5e performance ensures compatibility with common Ethernet standards while supporting high-speed data transfer for typical network applications.

Suitable for

• Wired Ethernet connections between switches, routers and endpoints
• Home and small office network installations
• Structured cabling where Cat5e performance is sufficient
• Temporary or permanent device connections requiring a 30 m reach

Key specifications

• Cable length: 30 m
• Cable type: U/UTP (unshielded pairs, overall unshielded)
• Standard: Cat5e
• Connectors: RJ-45 on both ends
• Contact plating: Gold-plated contacts
• Maximum data rate: up to 2500 Mbit/s
• Colour: Green

How to use

Connect one RJ-45 end to a network device such as a router, switch or network interface on a PC and the other end to the corresponding port on the destination device. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the cable to avoid sharp bends and areas of mechanical stress; maintain separation from strong electromagnetic sources to minimise interference. For structured installations, label both ends if multiple cables are present to simplify maintenance and troubleshooting.

Recommendations

Use this Cat5e cable for typical Ethernet speeds in residential and small business environments. For installations requiring higher shielding or faster standards (e.g., Cat6/Cat6a for sustained multi-gigabit links or environments with heavy electromagnetic interference), consider selecting a cable with appropriate shielding or higher category rating.