InLine Premium Καλώδιο ήχου RCA 2x βύσμα RCA/βύσμα επιχρυσωμένο 2 m

The InLine Premium 2x RCA male-to-male audio cable is a 2 m connection cable designed for transmitting analog stereo audio between consumer and professional devices. It has two male RCA connectors on each end with gold-plated contacts to improve conductivity and reduce corrosion. The cable uses 22 AWG conductors and is finished in a blue outer jacket, providing a balance of signal quality and mechanical durability for home audio systems, AV receivers, CD players, turntables with line-level outputs, and other equipment with RCA inputs and outputs.

Advantages

The gold-plated RCA contacts offer reliable electrical contact and resistance to oxidation, while the 22 AWG conductor size helps maintain low signal loss over the 2 m length. The blue PVC jacket provides visible identification and basic protection against bends and abrasion. The male-to-male configuration allows straightforward connection between source and destination devices without adapters, and the cable’s construction focuses on consistent stereo signal transfer with minimal interference in typical home and small-office environments.

Suitable for (tasks / use cases)

• Connecting CD players, turntables with preamp outputs, or tape decks to receivers or powered speakers
• Linking AV receivers to amplifiers or secondary inputs on audio systems
• Connecting DACs or external audio processors with RCA outputs to playback equipment
• Temporary or semi-permanent home audio cabling where a 2 m length is appropriate

Key specifications

• Cable length: 2 m
• Connector type: 2 × male RCA (stereo pair)
• Contact plating: gold-plated contacts
• Conductor size: 22 AWG
• Outer jacket colour: blue

How to use

Identify the left and right RCA connectors on both the source and target devices and match them to the corresponding inputs/outputs. Firmly insert the male RCA plugs into the RCA jacks until they sit snugly; the gold-plated contacts will ensure a stable electrical connection. Route the cable to avoid sharp bends, pinching, or placement near strong electromagnetic sources (large transformers, wireless routers) to reduce potential interference. Disconnect by pulling the plug body, not the cable, to avoid strain on the connections.

Recommendations

For best results, keep cable runs under the maximum recommended length for analog signals (2 m is suitable for typical home setups) and avoid running parallel to power cables. If you require shielding for long runs or a higher-grade conductor for critical listening environments, consider a dedicated shielded or higher-gauge audio cable.