InLine καλώδιο TAE-F, για εισαγωγή, TAE-F σε 6P4C, 10 m

The InLine TAE-F cable (model 18907) is a 10 m connection cable with a TAE-F connector on one end and an RJ11 (6P4C) plug on the other. It is intended to connect devices that use a TAE-F telephone interface (for import telephones and some Siemens Euro-Set models) to equipment or wall sockets with standard RJ11 ports. The cable's length and durable construction provide flexible installation options for both home and office environments.

Advantages

This 10 metre InLine cable provides a direct TAE-F to RJ11 (6P4C) connection without adapters, reducing signal loss and connection complexity. The robust build ensures reliable performance over extended use and the cable length allows flexible placement of telephones and communication devices relative to wall sockets or telephony equipment.

Suitable for

• Connecting import telephones with TAE-F sockets to RJ11 ports
• Hooking up Siemens Euro-Set phones to standard telephony equipment
• Extending reach between a TAE-F equipped device and an RJ11 wall jack

Key specifications

• Brand: InLine
• Model / MPN: 18907
• EAN: 4043718035755
• Connector A: TAE-F
• Connector B: RJ11 (6P4C)
• Length: 10 metres

How to use

Insert the TAE-F connector into the device's TAE-F socket and plug the RJ11 (6P4C) end into the RJ11 port or wall jack. Verify secure seating of both connectors. After connection, test the telephone or device for dial tone and proper operation. If using with specific Siemens Euro-Set models, ensure the phone is powered and configured according to the phone's manual.

Recommendations

For best results, route the cable to avoid sharp bends and sources of electrical interference. Do not subject the cable to excessive tension or crushing. If connection issues occur, check both connectors for debris and confirm compatibility of the connected devices.