InLine-Jumper με γλωττίδα, 10 τεμ., για πλακέτες και κάρτες διασύνδεσης Vintage-PC/Server

InLine Jumpers w. flap 10 pcs for vintage PC/Server boards and interface cards are a set of ten small metal inline jumpers with plastic flaps, intended for configuring hardware options on older motherboards, server boards and expansion/interface cards. The bright blue color (00075D) improves visibility when locating and changing jumper positions on crowded retro PC assemblies. These jumpers provide simple shorting of adjacent pins to enable or disable functions that were defined on the board during design.

Advantages

These InLine jumpers offer a compact, reliable means of connecting two adjacent contacts on legacy PC and server hardware. The plastic flap makes handling easier and reduces the risk of losing tiny parts during maintenance. The set of ten covers multiple configuration points and the consistent blue color helps with inventory and identification.

Suitable for

Key specifications

How to use

Place a jumper over two adjacent header pins to short them and change the circuit behavior as specified by the board documentation. Ensure power is removed from the system before moving jumpers to avoid damage. Use the flap to grip and slide the jumper on or off the pins; verify the correct pin pair using the motherboard or card manual.

Recommendations

Store unused jumpers in a labelled container to prevent loss and keep spare jumpers available when servicing vintage PCs or servers. Confirm jumper positions against the board’s manual before powering the system.