Ημερήσιος χρονοδιακόπτης REV 0025030102 Λευκό

The REV 0025030102 White daily timer is a compact digital timer designed for mains use with a 230 V AC input and 50 Hz frequency. With a maximum switching current of 8 A and a plain white housing, this timer offers scheduled control of electrical devices for daily routines and energy-saving applications. It provides reliable timing functions in a discreet form factor suitable for domestic and light commercial environments.

Advantages

This daily timer delivers precise on/off scheduling for appliances connected to a 230 V AC supply and supports loads up to 8 A. Its digital control provides repeatable daily programming, and the neutral white finish integrates unobtrusively into most interiors. The device is engineered for straightforward installation and consistent operation, helping to reduce unnecessary power consumption by automating device operation.

Suitable for

• Automating lighting circuits for daily schedules
• Controlling small pumps, fans or extractors within the current rating
• Scheduling heaters, kettles or similar appliances that do not exceed 8 A
• Timed control of display lighting or signage in shops and small businesses

Key specifications

• Supply voltage: 230 V AC
• Frequency: 50 Hz
• Maximum switching current: 8 A
• Housing colour: white
• Daily timing function with programmable on/off cycles

How to use

Install the timer according to local electrical regulations and ensure power is switched off before wiring. Connect the device to a 230 V AC supply and wire the controlled load to the output, observing the 8 A maximum current limit. Program the daily on/off times using the timer interface following the manufacturer’s instructions for setting time and switching intervals. After programming, restore power and verify the timer switches the load at the scheduled times.

Recommendations

Use the timer only with devices whose combined current draw does not exceed 8 A. For inductive loads such as motors or compressors, confirm that the device’s starting current is compatible with the timer or consider using a suitably rated relay contactor. Place the timer in a dry, ventilated location away from direct heat sources and follow applicable safety and installation standards.