HPE 146GB 2,5 inch SAS 10000 rpm RP001227575

The HPE 146GB 2.5" SAS 10000 RPM internal hard drive (MPN RP001227575, EAN 5711783688297) is a 2.5-inch Serial Attached SCSI (SAS) drive engineered for enterprise storage systems. With 146 GB capacity and a 10,000 RPM spindle speed, this HP Enterprise drive delivers consistent performance and reliable data transfer for servers and storage arrays that require higher I/O throughput and availability.

Advantages

This SAS drive provides increased reliability and security compared with many consumer interfaces, supports higher density configurations in rack-mounted systems, and offers predictable performance suitable for mixed enterprise workloads. Its 10,000 RPM rotation speed and SAS interface ensure lower latency and better sustained throughput than typical SATA drives, while the 2.5" form factor enables more drives per chassis for greater storage density.

Suitable for

• Enterprise servers and storage arrays requiring reliable, low-latency storage
• Datacenter environments with mixed workloads and constant availability needs
• High-capacity, low I/O environments where density and uptime are priorities

Key specifications

• Brand: HP Enterprise
• Model / MPN: RP001227575
• EAN: 5711783688297
• Capacity: 146 GB
• Form factor: 2.5"
• Interface: SAS (Serial Attached SCSI)
• Rotation speed: 10,000 RPM
• Category: HDD

How to use

Install the drive into a compatible server or storage chassis with a 2.5" SAS bay following the hardware manufacturer's installation procedures. Ensure the system firmware and RAID controller (if used) support the drive model. After physical installation, verify drive detection in the system BIOS/UEFI or RAID management utility, then configure RAID or volume settings as required and initialize the drive within the operating system.

Recommendations

Use the HPE 146GB 2.5" SAS 10000 RPM drive in enterprise-class systems that require consistent performance and high availability. Match the drive with compatible HPE controllers and firmware levels, implement appropriate RAID levels for redundancy, and monitor drive health with server management tools to maintain uptime.