Γωνιακός λειαντήρας Metabo 604125000, Δίσκος 125 mm, 11.000 Στροφές/λεπτό

The Metabo 604125000 is a 125 mm angle grinder with a no-load speed of up to 11,000 rpm, designed for cutting, grinding and surface preparation on metal and masonry. The compact housing and mid-size disc diameter provide a balance between control and material removal, suitable for workshop and site use. It accepts standard 125 mm discs and is intended for users who need a high-speed, versatile handheld grinder for a range of light-to-medium tasks.

Advantages

The tool combines high rotational speed with a 125 mm disc format to deliver efficient cutting and grinding action while remaining maneuverable in tighter areas. Its compact design reduces operator fatigue and improves access in confined spaces. Compatibility with widely available 125 mm accessories ensures flexible use for cutting, grinding, sanding and surface preparation. The straightforward control layout and balanced weight distribution support stable operation and predictable results on metal and masonry.

Suitable for

• Cutting metal pipes, bars and sheet metal
• Grinding welds and removing rust or paint from metal surfaces
• Cutting and dressing masonry, brick and concrete
• Sanding and surface preparation with flap or sanding discs
• General workshop and construction site tasks requiring a compact high-speed grinder

Key specifications

• Disc diameter: 125 mm
• Maximum no-load speed: 11,000 rpm
• Application: cutting, grinding, surface preparation on metal and masonry
• Drive type: electric handheld angle grinder
• Accessory compatibility: standard 125 mm discs, cutting wheels, grinding wheels and flap discs
• Ergonomics: compact housing for improved handling

How to use

Fit a compatible 125 mm disc securely according to the manufacturer's instructions and ensure the correct type of disc is used for the material and task. Wear appropriate personal protective equipment including eye protection, gloves and hearing protection. Start the grinder and allow it to reach full speed before applying it to the workpiece, using steady, controlled movements. Maintain a firm two-handed grip and avoid side loads or twisting motions that exceed the disc's intended use. After each use, disconnect the tool from power before changing accessories or performing maintenance.

Recommendations

Use cutting discs for straight cuts and thin-section material, grinding wheels for weld and rust removal, and flap or sanding discs for surface finishing. Verify the disc's maximum speed rating matches or exceeds 11,000 rpm. For prolonged work, use short, monitored intervals to prevent overheating and to extend disc life. Store discs flat and inspect them for damage before each use.