Godox X3pro C Πομπός φλας για Canon – ασύρματος TTL trigger, έλεγχος πολλαπλών καναλιών

Godox X3pro C is a wireless flash transmitter engineered for Canon cameras, providing TTL-compatible triggering and remote control of Godox flashes. The unit enables on-camera control of multiple flash groups and channels, allowing photographers to adjust flash power, mode and triggering behavior without leaving the camera position. It is intended for both studio and location workflows where consistent wireless synchronization and rapid setup changes are required.

Advantages

The transmitter offers full TTL communication with compatible Canon bodies, high-speed sync support, and multi-channel operation for reduced interference. Its group control lets you adjust power and mode for several flash units independently from the camera. The device features a clear control interface and fast radio transmission that improves reliability in crowded environments. Compact form factor and hot-shoe mounting preserve camera mobility while enabling advanced off-camera lighting setups.

Suitable for

• Portrait and fashion photography requiring multi-light setups
• On-location shoots where wireless control and quick adjustments are needed
• Event and wedding photography demanding reliable flash synchronization
• Studio workflows using group-managed flash ratios and remote power control

Key specifications

• Compatibility: Designed for Canon cameras with compatible TTL protocol
• Wireless protocol: 2.4 GHz radio for remote triggering and control
• Channels and groups: Multi-channel operation with multiple controllable groups
• Exposure modes: TTL and manual flash control; support for high-speed sync (HSS)
• Mounting: Standard hot-shoe interface for on-camera installation
• Display and controls: On-board interface for selecting channels, groups and power settings

How to use

Attach the transmitter to the camera hot shoe and secure it according to the camera and transmitter instructions. Turn on the transmitter and compatible remote flashes, select a matching radio channel and group assignments, then set the camera and flash exposure mode (TTL or manual). Use the transmitter’s controls to adjust group power levels, change flash modes, or enable high-speed sync as required. Confirm successful communication by firing a test shot and checking consistent flash output across the configured flash units.

Recommendations

For reliable operation, ensure transmitter and receivers share the same channel and group settings, keep firmware up to date on all compatible devices, and avoid large metal obstructions between units. When shooting in crowded RF environments, switch to a less congested channel and use group control to fine-tune lighting ratios without moving modifiers or stands.