FlashForge PETG 1,75mm κόκκινο 1kg νήμα 3D εκτύπωσης

FlashForge PETG filament combines the ease of printing of PLA with the strength and durability of ABS. This 1.75mm diameter filament in vibrant red is perfect for functional parts, prototypes, and artistic creations. With a net weight of 1kg on a standard spool, it offers excellent layer adhesion, low warping, and a glossy finish. Vacuum sealed with desiccant to ensure dryness.

Advantages

PETG is known for its high impact resistance, flexibility, and chemical resistance. It prints with minimal odor and is less prone to warping than ABS. The filament has a diameter tolerance of ±0.03mm for consistent extrusion.

Suitable for

• Functional prototypes and end-use parts
• Mechanical components requiring strength and durability
• Artistic and decorative objects with a glossy finish
• FDM 3D printers with heated bed

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Diameter: 1.75 mm
• Color: Red
• Net Weight: 1 kg
• Printing Temperature: 220-250°C
• Heated Bed Temperature: 70-90°C
• Diameter Tolerance: ±0.03 mm
• Density: 1.27 g/cm³
• Spool Diameter: 200 mm
• Spool Width: 65 mm
• Spool Hub Diameter: 52 mm
• Vacuum Sealed: Yes (with desiccant)
• Recommended Print Speed: 40-80 mm/s
• Odor: Low
• Warping Tendency: Low
• Finish: Glossy
• Tensile Strength: 50 MPa
• Elongation at Break: 200%
• Heat Deflection Temperature (HDT): 75°C

Recommendations

Store filament in a cool, dry place. Use a heated bed for best adhesion. Recommended for use with FlashForge 3D printers and other FDM printers.