Φιάλη πλήρωσης Alphacool 14467 1000 ml διαφανές LDPE

The Alphacool 14467 filling bottle is a 1000 ml transparent container made of low-density polyethylene (LDPE) designed for easy and precise management of coolant in water-cooling systems. The flexible narrow tube allows filling directly into reservoirs and expansion tanks even in confined spaces. A wide screw cap opening simplifies pouring and refilling the bottle, while the translucent material enables clear visual monitoring of liquid level and air content.

Advantages

The LDPE construction provides flexibility and resistance to common cooling liquids, while the transparent body offers good visibility of fluid volume and color. The narrow, flexible spout permits controlled filling and drainage in tight system layouts. The 1000 ml capacity reduces the need for frequent refills during filling or maintenance operations. The wide screw cap ensures spill-free pouring into the bottle and easy cleaning when required.

Suitable for

• Filling reservoirs and expansion tanks in PC water-cooling loops
• Draining or removing coolant from expansion tanks for maintenance
• Refilling and topping up cooling loops with precise volume control
• Use in workshop or bench setups when assembling or testing liquid cooling systems

Key specifications

• Material: low-density polyethylene (LDPE)
• Volume: 1000 ml
• Color/finish: transparent for visual fluid monitoring
• Nozzle: flexible narrow pipe for access to tight openings
• Closure: wide screw cap for easy filling and sealing
• Intended use: manual filling and draining of liquid cooling systems

How to use

Unscrew the wide cap and fill the bottle with the required coolant up to the desired level. Attach the flexible narrow pipe to the bottle opening if not pre-attached, position the nozzle into the reservoir or expansion tank opening, and carefully squeeze or tilt the bottle to dispense coolant. For draining, insert the nozzle into the expansion tank outlet and allow liquid to flow into the bottle by gravity or gentle suction. After use, clean the bottle with appropriate solvent for the coolant used, rinse thoroughly and allow to dry before storage.

Recommendations

Use compatible cooling fluids only and avoid aggressive solvents that can degrade LDPE. Store the bottle away from direct sunlight and high temperatures to preserve material properties. Clean thoroughly after each use to prevent contamination of coolant and verify seals on the screw cap and nozzle before each operation to avoid spills.