Εσωτερικό καλώδιο τροφοδοσίας DeLOCK 85510 0,3 m

This internal power cable by DeLOCK (model 85510) is 0.3 m long and features a 4‑pin floppy (Molex mini) connector on one end and a 15‑pin SATA power connector on the other. It converts one floppy power output from the motherboard to supply power to devices with a SATA 15‑pin receptacle. The SATA plug includes a metal latch to secure the connection.

Advantages

The cable enables powering a SATA device from a single floppy 4‑pin connector, saving the need to use an additional PSU connector. Its 0.3 m length is suitable for short internal routing inside PC cases. The metal clip on the SATA connector ensures a reliable, locked connection. The cable is offered in a polybag and uses standard connector pinouts for compatibility with common internal components.

Suitable for

• Connecting a SATA‑powered internal drive or device when only a floppy 4‑pin power header is available
• Upgrading or maintaining older systems with limited PSU connectors
• Compact PC builds where short cable length (0.3 m) is sufficient

Key specifications

• Brand: DELOCK
• Model: 85510
• Cable length: 0.3 m
• Connector 1: Floppy (4‑pin)
• Connector 2: SATA (15‑pin) with metal latch
• Product colour: Black, Red, Yellow
• Package: Polybag

How to use

Power off the PC and disconnect it from mains before installation. Insert the 4‑pin floppy connector into the corresponding power header from the power supply or motherboard. Align the SATA 15‑pin plug with the device's power receptacle and push until the metal clip clicks to lock. Reconnect power and verify the device is receiving power.

Recommendations

Use this cable only for internal connections; avoid routing near sharp edges or moving parts. Ensure correct orientation of connectors before insertion. If multiple devices require power, verify the floppy 4‑pin source can supply sufficient current for the connected SATA device.