Eaton Y7-170618 RCBO 1P+N 13A 30mA Type A B-Char 10kA

Protect single-phase circuits against both overload and earth leakage with the Eaton Y7-170618 RCBO. This 1P+N residual current circuit breaker with overcurrent protection combines MCB and RCD functions in a compact 2-module DIN rail unit, reducing wiring and space in distribution boards.

Who is it for

Electricians and panel builders installing residential or commercial final circuits where personal protection (30 mA) and cable overload protection are required. Ideal for socket outlets, lighting, and appliance circuits.

Main features

• Rated current 13 A, 30 mA residual current sensitivity
• Type A residual current detection (AC and pulsating DC)
• B tripping characteristic for general loads
• 10 kA short-circuit breaking capacity
• 1P+N switching, 2 modules wide

Specifications

• Device type: RCBO
• Number of poles: 1P+N
• Rated current (In): 13 A
• Rated residual current (IΔn): 0.03 A
• Tripping characteristic: B
• Residual current type: A
• Rated voltage: 230 V AC
• Rated frequency: 50 Hz
• Rated short-circuit breaking capacity: 10 kA
• Rated insulation voltage: 250 V
• Rated impulse withstand voltage: 4 kV
• Energy limitation class: 3
• Mounting: DIN rail
• Module width: 2 modules
• Degree of protection (terminals): IP20
• Degree of protection (installed): IP40
• Standards: EN 61009-1, IEC 61009-1
• Operating temperature: -25 to +50 °C

Tips

Ensure the upstream supply is isolated before installation. Use with a compatible Eaton distribution board and busbar system for a clean, professional assembly.