Λιπαντικό ολίσθησης DRYFLUID Gear Lube (20 ml)

DryFluid Extreme Gear Lube is a high-end dry lubricant specially developed for highly stressed gears, axles, joints, and bearing systems in model helicopters, RC cars, trucks, model railways, and servos.

Instead of classic grease or oil, this silicone-free, non-greasy formula uses dry particles, sliding polymers, and high-end sliding fluids that dry into a white lubricant film.

It features extreme pressure resistance, low sliding friction, and excellent adhesive force while being dust and dirt repellent to reduce wear, running noise, and power loss.

Compatible with current metal, plastic, and natural rubber materials, the 20 ml bottle includes a pinpoint dispenser, a separate fine cannula, and a fine hair paintbrush for precise application.

Dry lubricant for highly stressed gears in RC models and model railways

DryFluid Gear Lube is a dry lubricant developed for highly stressed gears in modelling applications. It has low sliding friction, pressure resistance and adhesion, with minimal dust and dirt adhesion. It is suitable for gears in model helicopters, RC cars, trucks, model railways and servos, and can also be applied to axles, joints and bearing systems.

Unlike conventional grease or oil, the lubricant is neither greasy nor oily; it is not wax and is silicone-free. Its multistage lubricant system uses dry particles, sliding polymers and sliding fluids for a long-lasting effect. After application, the fluid dries to form a white lubricant film.

• Highlights
• Reduces power loss through friction, running noise and wear
• Pressure-resistant, with long-term stability and adhesion
• Repels dust and dirt
• Specifications
• Content: 20 ml
• In the box
• 1× Pinpoint dispenser
• 1× Separate fine cannula
• 1× Fine hair paintbrush

The pinpoint dispenser and fine cannula are for precise application; the fine hair paintbrush is for surface applications.

DryFluid Gear Lube is a sliding fluid for highly stressed gears in model making. Areas of use are gears of model helicopters, RC cars, trucks, model railways and servos as well as shafts and cardan systems. It is not a grease, does not oil and is free of silicones.

The sliding fluid contains solid lubricant components, dry particles and sliding polymers. The multi-stage sliding material system is designed for long-term effect.

• Reduces power losses through friction and running noises
• Reduces wear
• Pressure-resistant and long-term stable with high adhesion
• Technical data
• Colour
• Liquid state: whitish transparent
• Resting state: White
• Density
• In liquid state: 0.91 g/cm³
• In dry state: 1.18 g/cm³
• Boiling point liquid: 82 °C
• Viscosity
• In liquid state (20 °C): Not determined
• In dry state: Not determined
• Temperature range
• Temperature resistance: −50 °C to 160 °C
• Recommended temperature range: −20 °C to 120 °C
• Specific electrical resistance
• Component microceramics: 10 E+12 Ohm × cm
• Component plastic sliding polymer: 10 E+16 Ohm × cm
• Component sliding fluid: 2.0 × 10 E+3 Ohm × cm
• Total conductivity: > 2.0 × 10 E+3 Ohm × cm
• Lubricant properties
• Pressure resistance according to DIN 51347: 185 N/mm²
• Friction coefficient: 0.13
• Content: 20 ml
• Scope of delivery
• 1× Dosing tip
• 1× Dosing cannula
• 1× Fine hair brush
• Notes

Apply a thin layer of Gear Lube; if possible, place the gear vertically and rotate it during application.

For hard-to-reach areas and spot applications, use the included cannula. For a fine, even distribution, spread the Gear Lube with the fine hair brush immediately after application.

• Thoroughly clean previously untreated gears before use.
• Shake well before use and apply sparingly.

The specific electrical resistance was measured in the dry state according to DIN EN 50359.

• Brand: DryFluid