DJI PRODUCT H — Αξεσουάρ για συσκευές DJI, μοντέλο CP.CR.00000033.01

PRODUCT H by DJI is an official accessory designed to extend the physical capability of compatible DJI ROMO cleaning robots. This auxiliary ramp allows ROMO models to traverse higher thresholds and small steps that would otherwise block movement, restoring or enhancing access across doorways and raised floor transitions. The ramp features a modular structure and a self-adhesive underside for quick installation and configurable width.

Advantages

The ramp's textured grooves improve wheel traction to reduce slippage while crossing thresholds. Its robust construction offers pressure resistance and stability under the robot's weight. Modular connections allow multiple elements to be joined every 10 cm so you can adapt ramp width to specific passages. The self-adhesive layer provides straightforward, tool-free mounting and holds the ramp in place during operation.

Suitable for

• DJI ROMO P, ROMO A and ROMO S cleaning robots that need to cross thresholds up to 4 cm
• Home or office environments with door sills, small steps or raised flooring
• Maintenance or field use when a temporary or semi-permanent ramp solution is required

Key specifications

• Maximum threshold height supported: 4 cm
• Element dimensions: 640 × 95 × 18 mm
• Element weight: 200 g
• Modular connection spacing: 10 cm intervals for width adjustment
• Surface finish: textured grooves for enhanced traction
• Mounting: self-adhesive underside for fast installation

How to use

Measure the passage or threshold you need the ramp to cover and join the required number of modular elements by aligning their connection points at 10 cm intervals. Clean the floor surface where the ramp will be installed to ensure good adhesion. Peel off the protective film from the self-adhesive layer and press the ramp firmly into position. Verify that the ramp is stable and level before allowing the ROMO robot to traverse it.

Recommendations

For reliable performance, install the ramp on a dry, clean, and level surface. Do not exceed the specified 4 cm threshold height. Periodically check the adhesive and connections for wear or displacement and replace the ramp elements if they show significant damage. If permanent access solutions are needed, consider a fixed threshold modification rather than relying solely on the auxiliary ramp.